- Description
- Tech Notes
- Features
ICON Vehicle Dynamics V.S. Series 2.5” coilover shocks are an incredible upgrade for the front end of 2021-2023 Ford F-150 Tremor and F-150 4WD trucks equipped with ICON's Front Knuckle Kit. These coilovers feature an application specific length for F-150 Tremor or other F-150 sub-models equipped with ICON’s Front Knuckle Kit, allowing the most wheel travel possible as well as a taller lift height range than other ICON coilover options. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 2.5-3” of lift height adjustability on F-150 Tremor or 3.5-4.5” of lift height adjustability on other F-150 sub-models allow the use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. When paired with ICON rear 2.0 Aluminum Series or 2.5 Aluminum Series shocks, vehicle control will be balanced front to rear, resulting in the best overall driving experience for your F-150.
ICON Vehicle Dynamics suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. Icon vehicle-specific tuned 2.5" coilover shocks feature an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle "feel" through the range of travel. These coilovers are height adjustable from 0-2.75" of lift allowing the use of larger, more aggressive wheel and tire combinations. ICON Vehicle Dynamics coilovers are an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
The part number for this item is Icon 91723 and it fits 2021-2023 Ford F-150 4WD Tremor 2.5 Series Front Coilovers (2.5-3" Lift) . Please refer to Tech Notes tab for excluded models/variants.
Factory Wheels & Tires Fitment: Not compatible with all available OE wheel/tire combinations. Aftermarket wheels with lower offset/less backspace recommended.
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5” Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25" Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.625" Backspace / 16mm Offset
Recommended Aftermarket Tires: 34" x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)
TECH NOTE: Only compatible with F-150 Tremor and 4-wheel drive (4WD) models
TECH NOTE: F-150 XL, XLT, Lariat, King Ranch, and Platinum also requires ICON Front Knuckle Kit, part number 94000.
TECH NOTE: Requires ICON Delta Joint Pro front upper control arms. DO NOT install in conjuction with OE or other brand aftermarket UCAs.
TECH NOTE: F-150 Tremor will have have lift height range of 2.5-3" over stock
TECH NOTE: Models equipped with gasoline/flex fuel engines will have lift height range of 3.5-4.5" over stock
TECH NOTE: Models equipped with PowerBoost hybrid engines will have lift height range of 3.25-4.25" over stock
TECH NOTE: Models equipped with Power-Stroke diesel engines will have lift height range of 3-4" over stock
TECH NOTE: Not compatible with F-150 Raptor
TECH NOTE: Not compatible with models equipped with Continuously Controlled Damping (CCD) system
TECH NOTE: Not compatible with models equipped with BlueCruise
Features:
Adjustable coilovers yield 0-2.75" of front lift height
Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
Superior low speed control reduces body roll and increases on-road stability
High quality ICON-engineered coil springs with higher spring rate included to better support added weight to front end
Corrosion resistant CAD plated shock body with 7/8" shaft
FK Rod End bearings provide extended longevity and minimal deflection
Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
Bolt-in design makes for an easy install into OEM shock location